This morning when i went to start my truck up there on the outside temp gauge it said ccd...can anyone tell me what that means??

also..the next time i went to start it i tryed the key on/off 3 times and it said P 1693 on the odometer....what does this mean??? thanks..-matt

 

1. the ccd means you compass needs to be calabrated. Drive a 360 degree circle.

2. The 1963 is in the ECM and means there is another code. If you cant pull it up with the on-off-on-offon key trick it will take a scanner to read.

Hope this helps

 

thanks for the quick reply...i will go try the on/off thing again...

any idea on what it could be with the ecm?? sumthin serious? hopefully not?? ill try that trick and check back..

 

I plugged in my trusty Superchips scanner i got for free cause its VIN locked....it gave me P0236..???

 

do a search for the code, here is a link for one of the threads about the same thing.
https://www.dieseltruckresource.com/...ighlight=p0236

 

In that they were saying sumthing about maybe from unpluggin the map sensor..which mine has been unplugged for the last week or so..untill a couple days ago i plugged it back it...the truck doesnt seem to run any differntly than it has been...so is it ok to try and just clear and code and ignore it??

 

I think you will be OK if you clear the code. If the truck runs OK and no Check Engiine Lite you should be good to go. If there is still a problem the code will come right back.