I have 2 things that need attention. First I'm getting ready to change out Ball joints on my 01. Can anybody send me a link for the best/ easiest way to do this. I've read that it can be a real pain. Second thing that I'm going to try and do myself is injectors. What is the proper procedure to change them out. I'm going with RV275's. Any information will be greatly appreciated!

 

Do a search on both items. Tons of info.

 

I did..... The problem is you get so much useless stuff that it's hard to siphon through it.

 

Injectors: http://dodgeram.org/tech/dsl/ISB/injector_replace.htm

No idea on the Ball Joints.

 

I have a universal ball joint kit in my tool box, but it sucks in comparison to the Chrysler tools.....also, your "3rd thing that will need attention" will most likely be your transmission. Injectors + tuner/box will probably put you in the gray area of reliability.

 

Have you had to do your tranny? You have the EZ and RV275's. That's about the same as what I have.

 

I'm about 95% done with my "back up" transmision. While I can drive the truck empty, it doesn't like to pull the trailer much at this time.