Turbo Flange Dimensions
Thread Starter
Registered User
Joined: Jan 2006
Posts: 1
Likes: 0
Turbo Flange Dimensions
Howdy,
I'm afraid I have neither a Dodge nor a Cummins, but rather an F250 with a Perkins 6.354. The turbo that is on it right now is not really the best match and I was hoping to use a turbo from a 6BT as the motors are reasonably similar. My problem is my exhaust manifold has a 3 inch square bolt pattern on the turbo flange so I will need to make an adapter. What are the dimensions of the flange on the 6BT? I have utterly failed at finding this info on the net.
Thanks,
Magnus
I'm afraid I have neither a Dodge nor a Cummins, but rather an F250 with a Perkins 6.354. The turbo that is on it right now is not really the best match and I was hoping to use a turbo from a 6BT as the motors are reasonably similar. My problem is my exhaust manifold has a 3 inch square bolt pattern on the turbo flange so I will need to make an adapter. What are the dimensions of the flange on the 6BT? I have utterly failed at finding this info on the net.
Thanks,
Magnus
Thread
Thread Starter
Forum
Replies
Last Post
Blacksunshine
3rd Gen High Performance and Accessories (6.7L Only)
9
May 6, 2011 07:18 PM
Txwelder
Performance and Accessories 2nd gen only
10
Jan 17, 2008 05:29 AM