NV4500 swap finished... video
#1
DTR question asker
Thread Starter
Join Date: Dec 2006
Location: Chapel Hill, NC
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
NV4500 swap finished... video
Heres a vid of the truck. As usual nothing crazy, no burnouts, etc., just mainly some driving around and makin a little noise.
If you just want to hear it run hard through the gears and stop the video, skip ahead to around 6:15, thats where I think the camera captured the best sound.
http://www.youtube.com/watch?v=W9hgZA0RPAE <-- for those that can't see the video appear in the thread
If you just want to hear it run hard through the gears and stop the video, skip ahead to around 6:15, thats where I think the camera captured the best sound.
http://www.youtube.com/watch?v=W9hgZA0RPAE <-- for those that can't see the video appear in the thread
#3
DTR question asker
Thread Starter
Join Date: Dec 2006
Location: Chapel Hill, NC
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Looking back on it it really wasn't that bad. Its nice to have a helper when you are installing the NV4500. It was well worth the effort involved.
I think I'll leave the 180 pump for quite some time, I doubt I'll ever want to make so much power that the 180 pump can't provide enough fuel.
I think I'll leave the 180 pump for quite some time, I doubt I'll ever want to make so much power that the 180 pump can't provide enough fuel.
#4
Registered User
Join Date: Sep 2007
Location: Gansevoort,NY
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
one day ill get around to doing mine. Everyone says that i should just sell this truck and go by one with a 5spd but i like this truck to much to get rid of it so im gonna have to start looking for a donor truck
#5
I didn't watch the whole video, just wanted to see it drive, but what are you going to do with the automatic column? Can you just remove the gear selector, or do you have to replace the column?
#6
DTR question asker
Thread Starter
Join Date: Dec 2006
Location: Chapel Hill, NC
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
I'm just gonna leave it... its not really in the way. If I wanted I have the column from the donor truck to swap in at some point. I'm not sure if you can remove just the gear selector.
#7
Registered
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
92GhostRyder
1st Gen. Ram - All Topics
27
09-16-2018 12:02 PM
avengerdude27
1st Gen. Ram - All Topics
18
01-02-2010 10:10 AM
Backwoods Bumpers
24 Valve Engine and Drivetrain
8
04-02-2009 03:16 PM