March TOM Candidate Sign-Up
Here is mine....To bad the cutoff is this Friday.Sure wanted to get some better pics.Just your basis dually with a new paint job I did outside last summer...It turned out ok for a outside paint job(two tone black&red)...3 coats of sikkens red base and 8 coats of sikkens clear coat,color sanded then buffed...Not much in the motor just the 3k,#10 plate,215 and testing a set of laser cut DV...for now

Just one more without pinstrip and body moulding.
Just one more without pinstrip and body moulding.
Last edited by Diesel Dave2; Feb 12, 2008 at 11:03 AM. Reason: add pic
Here's my 1998.5 Dodge Ram 3500 Sport with every factory option, including leather seats, sport package and rare Intense Blue Pearl colour.
9" of lift, six 37x12.5 Pro Comp Extreme A/T's with 3rd gen Ram 17" dually wheels.
Fully built DTT transmission, TST PM3 stacked with hypertech, dynoed 345hp/915lb-ft of torque, K&N air intake system, 4.5" stainless steel Magnaflow exhaust, complete PSC steering system with quick 3 turns lock-to-lock steering ratio.
Buckstop Outback Bumper with Hella Comet FF200 lights.
Access roll-up tonneau cover, self made running boards, completly upgraded audio with 2 10" subs and amplifier under the backseat.
And an Espar 5kw heater installed.
And I have changed every light on the trucks exterior to meet Finlands requirements. Had to built lights with an E-certicifation, even the register plate lights! I have yellow rear turning signals like european cars and also a electronic driving light height adjustment inside of the cab.
Not to mention about all the paperwork I had to do to get it registered here. This truck truly is unique!
Check out my gallery and my personal picture gallery at http://kuvablogi.com/blog/9142/
And a video:
http://youtube.com/watch?v=gsC9mFQWpWg
Thread
Thread Starter
Forum
Replies
Last Post




