M35A2 exhaust size?
Thread Starter
Registered User
Joined: Jan 2006
Posts: 1
Likes: 0
M35A2 exhaust size?
There is probably a more appropriate forum out there to ask this question, but I have faith that some of you fellas know the answer. What diameter is the exhaust on the M35A2 Deuce and a half? Is it 4 inches? I'm talking about the A2s with the stacks, not the A1s with the tailpipes. Thanks.
Registered User
Joined: Sep 2002
Posts: 161
Likes: 1
From: In the middle of Weather Dry Creek Farm in Avilla, Arkansas
Looking out over the lot, I didn't see any M35's, since they are being replaced by 900 series and LMTV/MTV's.
The "dirty air" engine had a 2 1/4 or 2 1/2 inch stack coming out of a muffler. The "clean air" (turboed) has, what looks like, a 3" or 3 1/2" pipe straight out of the turbo. We refer to them as whistlers.
When it gets light, I'll make a look/see. Don't want to roam right now since there is a kitty cat with racing stripes running around the lot.
Shortround out
The "dirty air" engine had a 2 1/4 or 2 1/2 inch stack coming out of a muffler. The "clean air" (turboed) has, what looks like, a 3" or 3 1/2" pipe straight out of the turbo. We refer to them as whistlers.
When it gets light, I'll make a look/see. Don't want to roam right now since there is a kitty cat with racing stripes running around the lot.
Shortround out
Registered User
Joined: Sep 2002
Posts: 278
Likes: 0
From: Benton, Arkansas
I've got a 1970 m35A2, the exhaust on the turbocharged Multifuel is 3.5'', but I adapted mine to 4'' straight out of the turbo since I bumped the timing up and cranked up the fuel, Its hard to believe its the same truck the way it moves now
Thread
Thread Starter
Forum
Replies
Last Post
schoust
2nd Gen. Dodge Ram - No Drivetrain
4
Oct 21, 2009 10:09 AM
bigdogtruck
2nd Gen. Dodge Ram - No Drivetrain
18
Nov 21, 2007 08:09 PM