December Truck of the Month Nominations - 4th Gens!
Our 4th Gen forum is growing so I thought we should focus on the newest Cummins powered trucks this month. It's a free-for-all this month - dually, SRW, C&C, pickup, 2wd or 4x4 - as long as it's a 4th gen it is eligible. 
Remember that your nominating pic MUST be from your DTR photo gallery. Cummins powered 4th gen (2010 and newer) Dodges only! All non-conforming entries will be deleted without further explanation.
Truck Of the Month Procedure
* Around the 1st of the month, we will post a thread with the winner for the previous month’s poll in the General Diesel Discussion section of the forums.
* At the same time, we will post a “TOM Candidate” thread in the same forum. In this thread we will announce the category of trucks that will be accepted as possible candidates. (1st Gen 250, 350, 2nd Gen 2500, 3500, 3rd Gen 2500, 3500, MegaCab, etc.)
* If your truck falls into the chosen category for that month and you would like to have a chance to be in the poll, then you can nominate your truck by posting ONE picture from your gallery in that thread.
* NOTE: The picture MUST come from your Diesel Truck Resource Member Photo Gallery!
(Anything else will be deleted.)
* You can also list some of the mods and accessories on your rig in the same post. Please post only once in that thread. If your truck is not selected for the poll or it is but it doesn't win, you may nominate it again when your category comes back around.
* Previous Winners of the TOM will not be eligible to participate. (Previous Winner being defined as truck and/or DTR Member)
* The “TOM Candidate” thread will be open from around the 1st of the month until around the 14th of the month. That gives you two weeks to submit your truck.
* At this time it will be locked, the three poll candidates will be chosen and the poll will be posted on or around the 15th . The poll will be voted on until the end of the month and we start all over again on the 1st of the next month by posting the winner in one thread and posting the “TOM Candidate” thread for the next month's category.
Special THANKS to Tim Barber at TRE Diesel Performance for sponsoring the TOM Award plaques! 

*****************************************

Remember that your nominating pic MUST be from your DTR photo gallery. Cummins powered 4th gen (2010 and newer) Dodges only! All non-conforming entries will be deleted without further explanation.
* Around the 1st of the month, we will post a thread with the winner for the previous month’s poll in the General Diesel Discussion section of the forums.
* At the same time, we will post a “TOM Candidate” thread in the same forum. In this thread we will announce the category of trucks that will be accepted as possible candidates. (1st Gen 250, 350, 2nd Gen 2500, 3500, 3rd Gen 2500, 3500, MegaCab, etc.)
* If your truck falls into the chosen category for that month and you would like to have a chance to be in the poll, then you can nominate your truck by posting ONE picture from your gallery in that thread.
* NOTE: The picture MUST come from your Diesel Truck Resource Member Photo Gallery!
(Anything else will be deleted.)* You can also list some of the mods and accessories on your rig in the same post. Please post only once in that thread. If your truck is not selected for the poll or it is but it doesn't win, you may nominate it again when your category comes back around.
* Previous Winners of the TOM will not be eligible to participate. (Previous Winner being defined as truck and/or DTR Member)
* The “TOM Candidate” thread will be open from around the 1st of the month until around the 14th of the month. That gives you two weeks to submit your truck.
* At this time it will be locked, the three poll candidates will be chosen and the poll will be posted on or around the 15th . The poll will be voted on until the end of the month and we start all over again on the 1st of the next month by posting the winner in one thread and posting the “TOM Candidate” thread for the next month's category.


*****************************************
Trending Topics
In Progress...
Thanks - will post more pics in the weeks to come - currently installing some new woofers behind the rear seat - factory alpine stereo is nice but not enough punch from that factory sub. 
Got a different side shot awaiting approval - should I use that one or stick with the one I posted?

Got a different side shot awaiting approval - should I use that one or stick with the one I posted?
Advocate of getting the ban button used on him...
Joined: Aug 2005
Posts: 5,082
Likes: 9
From: Live Oak Texas
Thanks - will post more pics in the weeks to come - currently installing some new woofers behind the rear seat - factory alpine stereo is nice but not enough punch from that factory sub. 
Got a different side shot awaiting approval - should I use that one or stick with the one I posted?

Got a different side shot awaiting approval - should I use that one or stick with the one I posted?
I wish I was as fine, as those who work the pipeline!
Joined: Dec 2008
Posts: 1,639
Likes: 0
From: Wyoming
Thanks - will post more pics in the weeks to come - currently installing some new woofers behind the rear seat - factory alpine stereo is nice but not enough punch from that factory sub. 
Got a different side shot awaiting approval - should I use that one or stick with the one I posted?

Got a different side shot awaiting approval - should I use that one or stick with the one I posted?
That thing is a beast!!!
And Chad was right 4 posts??? - Are 4th genners just a bunch a wimps or what???
Hows that for throwing down the gauntlet Chad!!!
Good Idea
Thanks wyododge - that's a great idea - might have to take a drive out to the mine one of these days and get a pic next to a haul truck - if i can find one that is fairly clean




, More pictures in Gallery