General Diesel Discussion Talk about general diesel engines (theory, etc.) If it's about diesel, and it doesn't fit anywhere else, then put it right in here.
Sponsored by:
Sponsored by: CARiD

1st Generation Video

Thread Tools
 
Search this Thread
 
Old Jan 25, 2007 | 09:47 PM
  #1  
tomd's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 434
Likes: 4
From: Boulder Creek Calif
1st Generation Video

http://www.youtube.com/watch?v=fIBv9_d_keE

I’ve been trying to capture and make a descent video with good sound and it’s been an ongoing experiment with the little time that I have to try and figure it all out. Sounds that are too loud will distort and sounds to low will not sound right, and wind makes noise. There is a fine line one must find and I have yet to find it.

At any rate,

Here is a little video I made from today on my way home. It is no Spielberg or an Ed wood but it’s all that I can come up with playing tonight on my pc for a couple.

Regards,
trd
Reply
Old Jan 25, 2007 | 10:40 PM
  #2  
NHdodgeman's Avatar
Registered User
 
Joined: Apr 2005
Posts: 397
Likes: 0
From: Derry, NH
Nice! I was diggin the music
Reply
Old Jan 26, 2007 | 12:02 AM
  #3  
tomd's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 434
Likes: 4
From: Boulder Creek Calif
Originally Posted by NHdodgeman
Nice! I was diggin the music

Thanks!

That was Roy Buchanan, Live in Japan.

A fantastic musician.

Thanks for noticing.

Regards
Rdunn
Reply
Old Jan 26, 2007 | 12:39 AM
  #4  
Raspy's Avatar
DTR's 'Wrench thrower...' And he aims for the gusto...
 
Joined: Oct 2003
Posts: 2,668
Likes: 3
From: Smith Valley, NV (sometimes Redwood City, CA)
Originally Posted by tomd
http://www.youtube.com/watch?v=fIBv9_d_keE

I’ve been trying to capture and make a descent video with good sound and it’s been an ongoing experiment with the little time that I have to try and figure it all out. Sounds that are too loud will distort and sounds to low will not sound right, and wind makes noise. There is a fine line one must find and I have yet to find it.

At any rate,

Here is a little video I made from today on my way home. It is no Spielberg or an Ed wood but it’s all that I can come up with playing tonight on my pc for a couple.

Regards,
trd
Reminds me of my 1st gen. Spent many hours cruising around in that truck, some of it in your area. The 1st gens have such a different attitude than the 3rd gens. I like the music too and just ordered the CD. Cool.

Wetspirit
Reply
Old Jan 26, 2007 | 01:01 AM
  #5  
tomd's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 434
Likes: 4
From: Boulder Creek Calif
This is one of only a couple that I dont have on Vinyl. Still looking and trying not to get outbid.

Live Stock is another worthy mention.

I play the cds in my system often. Nice when driving the highway and able to turn up the music when needed.
Reply
Old Jan 26, 2007 | 05:49 PM
  #6  
Lil Dog's Avatar
Chapter President
 
Joined: Feb 2002
Posts: 6,102
Likes: 2
From: Red Deer, Alberta Canada
I miss my first gens.. Put alot of good miles on them, they had their own sound for sure.
Reply
Old Jan 26, 2007 | 10:04 PM
  #7  
whereswaldo250's Avatar
Registered User
 
Joined: Apr 2006
Posts: 1,526
Likes: 1
From: Scottsdale, AZ
Nice sounding truck and great music
Reply
Old Jan 27, 2007 | 01:59 PM
  #8  
derek.mckay's Avatar
Banned
 
Joined: Oct 2006
Posts: 365
Likes: 0
From: San Diego, CA
I was filling up yesterday and a guy pulled up to the pump next to me in a 1st Gen...sure was a beefy sounding thing! We shot the stuff for a few talking about the trucks and him wanting to get a new truck...then we started up and all I could hear was him...drowned my 3rd Gen out BIG TIME! Good lookin truck!

Derek
Reply
Old Jan 28, 2007 | 08:47 AM
  #9  
goodeyesniper75's Avatar
Chapter President
 
Joined: May 2006
Posts: 1,253
Likes: 0
From: Kinnelon,NJ
what i nice ride....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chree
4th Gen Ram -Non Drivetrain- 2010 and Up
34
Jun 29, 2010 10:49 AM
1generationkid
1st Gen. Ram - All Topics
4
Jul 7, 2009 12:44 PM
Ram95
Performance and Accessories 2nd gen only
10
Sep 13, 2007 11:16 PM
Chip
3rd Gen Engine and Drivetrain -> 2003-2007
15
Dec 6, 2004 03:48 PM
guyssets
24 Valve Engine and Drivetrain
1
Jun 26, 2004 11:19 PM




All times are GMT -5. The time now is 07:26 AM.