WMO in 3RD Gen/HPCR Dodge Cummins?
#1
WMO in 3RD Gen/HPCR Dodge Cummins?
Hi all,
I've been reading with great interest about using WMO. I know most WMO users have 12-valve/VP44 engines, but I've noticed a few 3rd Gen Dodge Cummins HPCR owners trying it too. I'd like to hear more from those of you using WMO in your 3rd Gen Dodge Cummins HPCR engines, what kind of oil, how much, filtering, etc.
Thanks!
I've been reading with great interest about using WMO. I know most WMO users have 12-valve/VP44 engines, but I've noticed a few 3rd Gen Dodge Cummins HPCR owners trying it too. I'd like to hear more from those of you using WMO in your 3rd Gen Dodge Cummins HPCR engines, what kind of oil, how much, filtering, etc.
Thanks!
#2
Muted User
Join Date: Feb 2006
Location: Central Fl.
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
I found a new fuel filter in my garage off a Ford ranger, I pumped my well settled oil thru that into a clean gallon jug,then into the tank. 1/2 gallon oil to 10 gallons of diesel(5%). It doesn't know the difference, idles smooth as glass, but the exhaust smells more like the old diesel fuel before the ULSD stuff. I'll do it until I've used up the old oil from my last change. If any thing happens, I'll drain out what's left in the tank, refill, and bring it to the dealer for warranty, I have 45K on the truck, and could probably use a new set of injectors by now.
Thread
Thread Starter
Forum
Replies
Last Post
W.F.O.
3rd Gen High Performance and Accessories (5.9L Only)
11
06-10-2008 09:12 PM
SoCal-305
3rd Gen High Performance and Accessories (5.9L Only)
10
09-04-2004 04:25 PM