What day are the Trucks pulling? Who's all going?

 

"September 8th.

We will be pulling a street and open class.

Street is 8,000lb, single turbo with no adaptar plate. No drugs, DOT tires, stock hitches.

Open 8,500lb anything goes. If it's twined or on drugs it's gotta have safty equipment"

"No hanging weights or weights in cab on street trucks. Weights must be secured in bed. Hanging weights allowed in open."

"You are correct Bill. Street pulls Friday and Saturday nights (9/8-9/9).
Open pulls only Friday night."

The following quotes taken from posts on www.kydtr.com

 

Thanks Pourin! We're hoping to be at this one. Thanks again.Cin

 

You better just hang out with us both nights lol

 

I think I'll be there Friday.
I am not really sure on Saturday though.

Hopefully I'll get to pull in both classes!

 

dont forget tonight!

 

What can I say:

CARNAGE!!!

If your name was Justin and you had a 3rd gen sledpuller then you were a marked man at this pull.

Both myself and Justin Bowlilng broke in our classes.

It looks like yoke and transfer case for Justin B.
Right now my list of carnage from this pull is: Exhaust system, U-Joint, Carrier bearing, Yoke @ transfer case......and I havent even looked at it good yet!

JUST A TACKY TRACK!!! My SATAN tires unleashed HELL on my truck!


Thanks to Jesse, Bryan, Bill, Darrell, Chris and Wayne for lending a hand in getting me going again

 

At least it wasnt a tranny sorry to hear about it but it dont sound too bad.

 

Rough night. We all got home about 4:30 from there.
Williams hope ya get it back on the road soon.

 

Thanks Shaun. It will probably be a while. The rear driveshaft is junk too.

 

The verdict is in, broke the output shaft in the NV 5600. It broke as clean as if you sawed it into. Where's the best place to get a new shaft at?

 

Ouch man.
Sorry to hear about that.

www.enterpriseengine.com has the heavy duty output/main shafts for the 56.

If you want to put in a stock replacement try
www.mantrans.com
http://stores.ebay.com/highgeartrans
http://www.standardtransmission.com/

 

I talked to severenson at the hillsboro pull he said they were known for that I would probably get the upgraded shaft from enterprise.

 

You should be proud I think you are the first one too brake a NV5600 output shaft on a 3rd gen.

 

Oh yeah, proud, that's how i'm feeling. NOT!!! It's not as bad as i thought it would be though, $600 for a shaft from EEP. You think i might get a free shirt or hat?!? Probly not. Thats my luck!