Great HP numbers. Awesome job.

 

great numbers. congrads, now i would like to see some pics.

 

There are pics. in my gallery and the dyno video is at www.relentlessdiesel.com in the video section

 

that's pretty cool how that cloud of smoke just disappears when the turbos kick in

 

RC
Did I miss something? where did you find the extra ponies?
Great numbers , I'm surprised your flex plate lasted this long. doug

 

My cp3 is performing really well,I getting stage 2 from relentless diesel hopefully next week ,it should be good for another 40-50hp.I am also going to be ordering a cam next week,how do you like your helix 3?I think I am leaning towards the helix 2.Cams are a confusing subject,everyone likes the f1 cams ,but I have not seen any advertised gains,on the other hand I have seen piers cam pick up 35hp on a dyno.I think DonM is a pretty smart guy and he knows what he is doing , so i will probably end up buying one.

 

RCCOX, The Helix 3 is best from what I've read for a modified CP3..but you will need the spring kit also which doubles the $$$. $750 for cam, $200 for Bolt on gear $600 for Springs. Given your level of power this is a good investment. When your flexplate went did it trash anything else. Check the pump...mine was trashed when the flexplate went. Good luck on the 11's. ks

 

The cam is great , smooth idle & the twins seem to like it. Im no expert but they seem to spool before the fuel hits. I have no dyno numbers.
I think the thrill will come when we start turning more RPMS . IM hoping smarty takes us closer to 4000.

 

Did you have your pump replaced when u changed the flex plate or did you not realize until after?? I just broke my 2nd flexplate and put an ATS one in,now the tranny is leaking and temps have increased a little. what could this be??

 

Cool vids and congrats on the numbers.

Andy

 

My pump was fine when I broke the flexplate,I just had to get the bushing replaced,after that episode this past friday night I went back to the track to try to break into the 11's and I blew my head gasket.I knew it was hurt when I put the studs in ,but I thought it would hold,I thought wrong.

 

Oh well. That is a lot of stress on stuff! Get it fixed,a nd try the track again. Sounds to me like you should be able to pull 11's .

Eric