Hey i finally got down to the track last friday to run the 1/4 mile. I ran a 16.7 @ 80 mph. I am happy with that time, just because of the amount of things i have done to my truck (not a lot of mods YET). let me know what you think. Soon to have 370's and maybe a bigger turbo on and then go run it again and see what it will run. Any others with 1/4 mile times? wouldnt mind seeing your time and mods either.

 

That great, I've trying to get to the track to run my 1st gen, but everytime I go to the track it rains

 

look here...

https://www.dieseltruckresource.com/...ad.php?t=69098

 

That sucks well you will have to let me know when you do run what you get. I was just reading some of your posts im smokin 92's friend.

 

What were your 60 foot times and 1/8 mile times? My times are in my sig.

 

the run i got a 16.7 my 60 foot was 2.401 and 1/8 was a 10.612. whats your 60 foot and 1/8 mile?

 

My 12.84 pass was a 1.66 60 foot and a 8.21 1/8 mile. For bracket racing I usually launch at 15 psi and run 60 foots in the 1.75 to 1.77 range and 1/8 mile times in the 8.30 to 8.33 range. With 13.0 1/4 mile times. Launching at 20 psi and harder isn't consistent due to spinning and I hate the feeling of spinning all four and then suddenly hooking up .

 

sounds like a well built truck. I wish i could say the same by having to worry about all 4 tires spinning.(then i would have a fast truck which is what im going for )

 

mike quit yer lyin. hehehe it's an awesome site to watch a truck burn all four past the christmas tree. i'm a witness to it.

 

I'm not to fond of the way everything feels when that happens. I swore something was going to let go when it finally hooked.

 

I with you there. It has an ugly feeling. Spinning all 4 when it hits 2nd gear isn't as bad though...

Paul