3rd gen control arms
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: Okotoks, AB
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
3rd gen control arms
anybody know where i can get a set of 3rd gen control arms?
i am replacing my stock bushings with poly bushings and would like to switch to the 3rd gen style as they are a box design rather than a channel design. i believe they will fit (so i've been told).
any input on this matter would help me out a lot.
thanx,
jason
i am replacing my stock bushings with poly bushings and would like to switch to the 3rd gen style as they are a box design rather than a channel design. i believe they will fit (so i've been told).
any input on this matter would help me out a lot.
thanx,
jason
#2
Registered User
Join Date: Aug 2004
Location: SoCal
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
Call these guys..........http://www.bigdogtrux.com/
#3
Registered User
Join Date: Feb 2008
Location: Alberta
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
BlackSilver, if your not in a hurry and can wait till mid July (will be out of da bush and home) I have a set from my 05 3500 you pay the shipping (Edmonton to Calgary) and they be yours.
pm me if interested
pm me if interested
#5
Registered User
Thread Starter
Join Date: Oct 2007
Location: Okotoks, AB
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
thanx for the replies/offers. i think i'll just stick with the stockers as im not 100% sure the 2nd gen bushings will fit into the 3rd gen arms. i don't do anything with the truck that really warrants beefed up control arms either. also, i need them pretty quick as the truck goes in within a week to have an alignment and ca bushings replaced.
im taking it in to DPS to have them swap out leveling springs for a different leveling spring (not happy with the ones i just installed). they will also replace the control arm bushings with poly ones and then do a wheel alignment. anybody know if they will align to custom specs, or just 'get it into the green'? i am supplying the springs and bushings. should i stick with DPS for this work? or anybody have any recommendations for another shop?
thanx,
jason
im taking it in to DPS to have them swap out leveling springs for a different leveling spring (not happy with the ones i just installed). they will also replace the control arm bushings with poly ones and then do a wheel alignment. anybody know if they will align to custom specs, or just 'get it into the green'? i am supplying the springs and bushings. should i stick with DPS for this work? or anybody have any recommendations for another shop?
thanx,
jason
#6
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
03CTDCO
3rd Generation Ram - Non Drivetrain - All Years
4
06-03-2011 09:56 PM
wcbcruzer
Performance and Accessories 2nd gen only
4
09-07-2006 11:01 PM
CumminsDreamin
3rd Gen High Performance and Accessories (5.9L Only)
46
07-23-2006 10:37 AM