All links on that page are clickable for me and lead to more specific info......Ben

 

Anyone find a picture of this switch bank yet??

Chris

 

I couldn't click on any of the buttons, nothing would happen. I was able to make open correctly at work. Also I emailed them and they are sending me a paper copy as well. Thanks.

No luck finding this switch bank yet. I would like to see it also.

 

Found a picture...now to find the parts...

Chris

 

Yeah I need that part number.

That would work perfectly for me. I already have holes drilled in my dash below that panel but I have plans for a lot of extra goodies to control.

 

I think I could make some of it work...I don't have but about 4 extra holes for switches anyway with all the goodies on the truck

Chris

 

I am interested in that switch bank as well. From what I found in my research is that the mentioned switch bank is what is available on the 2011 Chassis Cab trucks. Still no part # though. I will call the parts department at the dealership I purchased my truck from to see if they can get a hold of that part and any related wiring for it (they are the worlds largest dodge dealer and often get the first shipment of new vehicles, so they may know where to go).

Go to http://www.dodge.com/bodybuilder/year.pdf and select the 2011 Chassis Cab button, select any of the models, then Electrical/Wiring Information. If it doesn't work, your Adobe Reader may need to be upgraded.

 

part # 5164912AC list 102.00 net 77.60 freight 10.95 total 88.55 to your door.

People at Berry Chrysler Dodge Parts were very very very helpful in researching the correct part number. They actually got a parts dept employee on the phone to help me that had been to school on the 2011 chassis and he was aware of the switch bank, ordered it, discounted it and sent it out to me. Please note it only has 4 switches as in the picture. As of this time Dodge only offers the extra switch bank with the 4 switches.

Actually in the 2011 chassis, it comes pre-wired to an under hood aux power disturbitution panel.

 

oh silly me, maybe I am allowed to give their phone number, parts direct 903 874 6874.

As a side note, I live in NJ and purchased my new truck in NJ, the NJ dealer was clueless about the switch I was asking about, even though I clearly explained what I wanted. I found the Texas dealer on line and they were very very helpful.

 

Silly question because I have had my dash apart now more than once and I know that there are some wires to that panel but I think they are for the heated seats and steering wheel. I think there is 3-4 20 gauge wires leading to that panel and if they are to an underhood panel were would it be?

 

Does it look like you can take the switches out of the "panel" they are in and move them to the blank spots in the truck?

Chris


I just called and ordered one anyway Just curious though!

 

No, I do not think there is any way to take the switches out and relocate them.

Now I have to look for a connector or create one. Right now I have the switches and expect my truck any day now.

 

I should have the switches tomorrow...I'll figure out a way

Chris

 

You can't order the pigtails also?......Ben

 

Got mine...won't be able to take it apart and swap switches into factory setup without a new circuit board with the right contacts on it.

I also don't want to lose my heated/ventilated seat switches to use these AUX switches.

Back to the drawing board.
Chris



BTW, if anyone needs this one, PM me...I can't use it.