Bumper Swap
#4
Just a plain ole guy
My son Plasti-Dipped his chrome front bumper on his 05. I thought it was a stupid idea and it would just peel right off. It turned out flat black, which you have to get a topcoat to make it shiny. He did not do that. And when we decided it was time to sell it, it was about impossible to get that stuff off.
#5
Registered User
Thread Starter
Join Date: May 2016
Location: Kansas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
My son Plasti-Dipped his chrome front bumper on his 05. I thought it was a stupid idea and it would just peel right off. It turned out flat black, which you have to get a topcoat to make it shiny. He did not do that. And when we decided it was time to sell it, it was about impossible to get that stuff off.
#6
Just a plain ole guy
Make sure the bumper is clean and wipe it down with lacquer thinner. Spray it in 4 or 5 very light coats. remove any trim that you can and mask off what you can't.
Thread
Thread Starter
Forum
Replies
Last Post
schorb
3rd Generation Ram - Non Drivetrain - All Years
4
05-01-2007 08:18 AM
ocsurf16
3rd Gen High Performance and Accessories (5.9L Only)
1
04-02-2007 03:41 PM
tanderson2002us
2nd Gen. Dodge Ram - No Drivetrain
9
03-17-2005 05:53 PM
c5r
3rd Generation Ram - Non Drivetrain - All Years
4
10-27-2004 05:41 PM