need to replace original clutch. Advice?
#1
Registered User
Thread Starter
need to replace original clutch. Advice?
Finally at the point that the original clutch is wanting to slip when pulling a trailer and heavy acceleration. I am looking for options for a mildly tuned, deleted, and not over throttled 2010 crew cab shortbed 4x4. I do not drive hard and want a normal driving experience if at all possible without a lot of clutch rattle. Was looking at a South Bend Street Dual Disc (SDD) clutch so far. Please let me know thoughts and options for my application. Thanks!!!.
#2
Registered User
Give SBC or Valair a call with your specifics.
I've got the SBC OKHD single. It'll hold a 90 hp tune,35's and a 1800 popup camper.
Zero clutch rattle but it has the expected gear rollover sound if I lug it. Thicker fluid will be necessary with the single mass flywheel conversion.
I've got the SBC OKHD single. It'll hold a 90 hp tune,35's and a 1800 popup camper.
Zero clutch rattle but it has the expected gear rollover sound if I lug it. Thicker fluid will be necessary with the single mass flywheel conversion.
Thread
Thread Starter
Forum
Replies
Last Post
Little-bit
24 Valve Engine and Drivetrain
14
06-09-2006 04:29 PM