So I was installing my GDP 2 micron fuel filter kit the other day and I noticed that my lower trans cooler line is kinked slightly on the rubber hose part by the CP3. I don't have an issue with trans temps, I'm usually running around 140-150*F and its been warm here the last week or so, 30*C or 85*F. Thing is I'm supposed to be pulling my parents camper to Saskatchewan for a camping trip and although small and light (20ft, roughly 3500#) I'm still a little worried this might present a problem. I put a zip tie around it to the other line to try and force it straighter but I may end up having to bend the steel line a bit

Anyone else encounter this issue?