Hub/rotor bolt size and type
#1
Registered User
Thread Starter
Hub/rotor bolt size and type
Just pulled my rear hub assembly off of my 2012 3500 dually. According to a video I watched the bolts to separate the rotor from the hub were suppose to be 15mm bolts but appear to be torx(E-socket). My question is what size is it so I can have my wife stop and pick it up while shes out shopping
#2
Registered User
Thread Starter
Well I'm going to answer my own question...its a torx E-20 that I ended up finding at Dynamite tools. Had to buy a 8 piece set for 1 socket.
#3
Just a plain ole guy
We have a Harbor Freight here. Alot of their tools are junk but the sockets and wrenches are actually very good. I can get a whole set of torx impact grade 1/2 inch drive sockets for the price of just one socket just about anywhere else. Too late for that but if you have one look them up. I've heard they are the same or similar to Northern Tool.
Thread
Thread Starter
Forum
Replies
Last Post
2003slt
3rd Gen High Performance and Accessories (5.9L Only)
2
06-07-2017 09:35 AM