Hi Guys
I have a 04.5 and just purchased a Viper 791XV 2-Way Security and Remote Start System and was wondering if anyone had the specific wiring point schematic as far as location/colors like the alarm installers have. i know it will simplify the installation alot and reduce the time by not having to hunt for them correct wires.

 

the wiring info is in my gallery.

 

Cool - I was just logging in to see if anyone has any experience with this product - I love this site.

Can anyone tell me if it's true that the wait to start must run off of a timer instead of tapping into some mechanism that tells it when the grid heater has turned off?

Thanks,
Walt_Mink

 

that i have not tackled yet, so when i do i will post. i needed the starter kill and the door actuators and the regular alarm portion done before i leave for vacation this sat. but when i get back i will be installing the remote start and the turbo timer, along with a proximity sensor. you guys will not need the door actuator portion if you already have automatic door locks. also for those with power windows you have the ability to have the windows rool down with the touch of a button with this alarm.

 

Yes you will need a timer for the wait to start and you will also need a door lock module and key bypass module if you have the grey keys. Good luck!