tow mirror studs - how do I get them out?
05-25-2010, 07:10 AM
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: West Virginia
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
tow mirror studs - how do I get them out?
I got a set of mirrors off a dtr member and I need to figure out how to pull the studs off the mirror. I dont think they are threaded. I ran the nut down and figured they would be left hand threaded but they wont budge. Surley they arent glued in?
05-25-2010, 10:00 AM
#2
Registered User
Thread Starter
Join Date: Feb 2006
Location: West Virginia
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
I got them out. I used a flat file to make two flat spots on the small shoulder of the stud. Took small pair vise grips and the stud came out. Not left handed.
Thread
Thread Starter
Forum
Replies
Last Post
stock600
3rd Gen Engine and Drivetrain -> 2003-2007
29
12-31-2007 10:41 AM
tool
3rd Generation Ram - Non Drivetrain - All Years
9
10-23-2007 08:45 PM
Jim Fulmer
Performance and Accessories 2nd gen only
48
01-29-2003 10:21 PM