3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Sun Visor

Thread Tools
 
Search this Thread
 
Old Oct 4, 2007 | 08:12 AM
  #1  
TonyB's Avatar
Thread Starter
Registered User
 
Joined: May 2005
Posts: 1,607
Likes: 1
From: Gilbert, Az
Sun Visor

So when making left turns with the sun visor down, against the drivers side window, it rotates back around and hits me in the head. Mind you, it's not violent, just an annoyance. If I wedge it under the drivers' door a little, it will stay, but that can't be good for the swivel point.

Anyone else experience this? Anyone have a fix?

TIA

Tony
Reply
Old Oct 4, 2007 | 11:12 AM
  #2  
EDR's Avatar
EDR
Registered User
 
Joined: Oct 2006
Posts: 503
Likes: 0
From: Kennewick, WA
Not sure if this will work on our Dodges, but on my other vehicles I was usually able to just tighten the screws that hold the post that the visor rotates on to solve the problem. Might give it a try.
Reply
Old Oct 4, 2007 | 02:54 PM
  #3  
dezeldog's Avatar
Registered User
 
Joined: Jul 2004
Posts: 506
Likes: 0
From: the mitten
I have a problem with mine staying up against the roof. It is never as tight as the passenger side and if I hit a hard bump it falls down. Any one have a cure for this anoying problem or is it time to buy a new one.......TIA

Jim
Reply
Old Oct 4, 2007 | 03:38 PM
  #4  
SOhappy's Avatar
Registered User
 
Joined: Feb 2006
Posts: 2,280
Likes: 10
From: Udaho
Originally Posted by dezeldog
I have a problem with mine staying up against the roof. It is never as tight as the passenger side and if I hit a hard bump it falls down. Any one have a cure for this anoying problem or is it time to buy a new one.......TIA

Jim
Mine started doing that last year. I took all the heavy stuff out of the visor pocket (checkbook, pens, tire gauge) and put them in the center console. That did the trick. Someone else on DTR was going to try velcro, never did find out how that worked.
Reply
Old Oct 4, 2007 | 10:33 PM
  #5  
TonyB's Avatar
Thread Starter
Registered User
 
Joined: May 2005
Posts: 1,607
Likes: 1
From: Gilbert, Az
Originally Posted by EDR
Not sure if this will work on our Dodges, but on my other vehicles I was usually able to just tighten the screws that hold the post that the visor rotates on to solve the problem. Might give it a try.
Thanks!

I'll take a look tomorrow.

Tony
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mexstan
3rd Generation Ram - Non Drivetrain - All Years
8
Nov 10, 2006 07:44 PM
radshooter
3rd Generation Ram - Non Drivetrain - All Years
2
Aug 22, 2006 10:52 PM
bward623
2nd Gen. Dodge Ram - No Drivetrain
1
Jul 9, 2006 10:30 PM
turbov6joe
3rd Generation Ram - Non Drivetrain - All Years
15
May 1, 2005 08:02 AM
billyrae
3rd Generation Ram - Non Drivetrain - All Years
4
Apr 12, 2005 10:31 PM




All times are GMT -5. The time now is 09:58 AM.