SEATS what year seats will fit our trucks
#2
Registered User
06-09 are the same, covers and everything. I don't think 4th gen seats are too hard to install, look up 4th gen seats in a third gen. I know I've seen it posted here and other sites before.
#5
Sure, ill try to answer the question you all may have. I dont have a mega, but i have read posts of this on CF.
The fronts bolt right in, the console on the 4th gen bolts through the floor on the drivers side, as the 3rd gens dont. My console is bolted to the pass. seat and thats all, never a prob, no wiggle at all. I wasnt about to drill holes in my cab floor!
The rear seat brackets need to be trimmed, i trimmed front AND back of bracket and 'i think' i had to drill one hole. The seat backs took some tweeking but they are in and i love them.
The fronts bolt right in, the console on the 4th gen bolts through the floor on the drivers side, as the 3rd gens dont. My console is bolted to the pass. seat and thats all, never a prob, no wiggle at all. I wasnt about to drill holes in my cab floor!
The rear seat brackets need to be trimmed, i trimmed front AND back of bracket and 'i think' i had to drill one hole. The seat backs took some tweeking but they are in and i love them.
Thread
Thread Starter
Forum
Replies
Last Post
PourinDiesel
3rd Gen High Performance and Accessories (5.9L Only)
34
10-19-2006 07:33 AM
AggiePhil
Performance and Accessories 2nd gen only
2
02-09-2005 12:26 PM