So I went to be with a old highschool buddy last night, and we were talking about some of the junk I am putting on my truck. He asked about my bumper and said something about the fog lights. That's when I looked down and noticed I had a fog light that was shattered. I just bought a used set off Cummins Forum.

What all do I have to do to get the old light out and the new one in? I assume it's pretty straight forward and you can just un bolt the old light from under the bumper and pull it out?

 

3 bolts and the wire plug is what it takes, old out, new in...

Get a set of these clear covers, No more broken lenses....> http://www.lamin-x.com/Dodge-Ram-06-...s-p/d108-2.htm

 

Will the lens still brak but just stay together with that stuff?

 

I had to change one a while back, ordered it off ebay, don't remember to store name. It was good quality and fit well. Make sure you set the adjustment to the angle your factory one is that you remove. I just eyeballed mine and it was good.

Also I remember you were looking at a new fueling system awhile back in a thread I started. Did you get it done yet? I went with the AirDog. I also adjusted the valves and added a smarty jr, can't tell you how much it woke up my truck, it is night and day.

Good luck with the light, it's a breeze.
Jim

 

Keeps the lens from breaking, its about an 1/8" thick

 

I got a set from a guy for 55 bucks shipped.
I haven't got the fuel pump yet. I am trying to pickup a used smarty Jr then I will get a pump down the road.