New Big Tube Buckstop Installed
New Big Tube Buckstop Installed
This piece is really nicelly built, heavy duty but not overly so, i was able to install it by my self in a bout 4-5 hours, i still need to wire up the lights and winch
Question::: Can i wire the new Hella 500 fog laps to the existing harness??.
I put some more pics in my gallery.
Rick
Question::: Can i wire the new Hella 500 fog laps to the existing harness??.
I put some more pics in my gallery.
Rick
Looks like what I want for my 98. Just a little too much jingle right now. I like.
As far as the lights, I'd probably add a dedicated circuit for them and just figure a way with relays so that the existing wiring is used for just a trigger. I expect they will pull quit a bit more amperage than stocks.
Ed
As far as the lights, I'd probably add a dedicated circuit for them and just figure a way with relays so that the existing wiring is used for just a trigger. I expect they will pull quit a bit more amperage than stocks.
Ed
Trending Topics
charcoal600,
I was thinking of trying to sell the entire front bumper lights and all.
CTDinMT,
Santa Did'nt bring me one either, i wish he woulda, my checking acount would look alot better!!
Rick
I was thinking of trying to sell the entire front bumper lights and all.
CTDinMT,
Santa Did'nt bring me one either, i wish he woulda, my checking acount would look alot better!!
Rick
DTR's Self Appointed Beer Advisor
Joined: Apr 2003
Posts: 666
Likes: 0
From: On my way to Hell... Need a lift?
Very nice,
Wish I could afford one. But with a baby on the way I guess you have to have priorities.
I will have to settle for what I’ve got:
Dodge Light Bar
britt
Wish I could afford one. But with a baby on the way I guess you have to have priorities.
I will have to settle for what I’ve got:
Dodge Light Bar
britt
Yes, you can use the existing fog light wiring. It is a dedicated circuit with its own relay already in the power distribution center in the engine compartment. If I'm not mistaken, it's relay #62 if you want to check for yourself.
handymantim, Thank for the info, if my truck ever thaws out i might be able to get out and finish the wiring.
t-7 firefighter, I was checking out your site, awsome pics, looks like my vacations, check out the link this is my favorite engineer pass pic
eng. pass
I really like that rack on your cap, i'm thinking of getting on for the top of the cab.
Rick
t-7 firefighter, I was checking out your site, awsome pics, looks like my vacations, check out the link this is my favorite engineer pass pic
eng. pass
I really like that rack on your cap, i'm thinking of getting on for the top of the cab.
Rick
DTR's Self Appointed Beer Advisor
Joined: Apr 2003
Posts: 666
Likes: 0
From: On my way to Hell... Need a lift?
Originally posted by Rick D
t-7 firefighter, I was checking out your site, awsome pics, looks like my vacations, check out the link this is my favorite engineer pass pic
eng. pass
I really like that rack on your cap, i'm thinking of getting on for the top of the cab.
Rick
t-7 firefighter, I was checking out your site, awsome pics, looks like my vacations, check out the link this is my favorite engineer pass pic
eng. pass
I really like that rack on your cap, i'm thinking of getting on for the top of the cab.
Rick
Rick,
Awesome picture. We went on some trails like that a few years ago right outside of Ouray. Yankee Boy Basin leading up to Imogene Pass. We were in my wife’s Jeep and were going over some stair steps that were snowed over. The jeep started sliding toward the edge and barely stopped. Had to clean my shorts.
What time of year was this picture taken? We usually go out to Colorado (Durango) in July and October every year.
Once again, very nice truck. Wish I could afford one of those bumpers but we’re saving up for the newborn right now.
Britt
Britt
That trip was near the end of october Silverton was pretty much boarded up, there were a few places that had a pretty high Sphincter Factor, I was in my first gen with a camper on the back, going down was the worst, anything above 12000ft the truck did'nt want to idle very well.
The last few years i've been going to utah for the ATV jamboree in Richfiel and Marysvale.
Rick
That trip was near the end of october Silverton was pretty much boarded up, there were a few places that had a pretty high Sphincter Factor, I was in my first gen with a camper on the back, going down was the worst, anything above 12000ft the truck did'nt want to idle very well.
The last few years i've been going to utah for the ATV jamboree in Richfiel and Marysvale.
Rick
Thread
Thread Starter
Forum
Replies
Last Post
CrazyCooter
3rd Gen High Performance and Accessories (5.9L Only)
8
Mar 5, 2010 11:57 PM
PeteRR
Performance and Accessories 2nd gen only
4
Jun 6, 2005 01:11 AM
y-knot
Performance and Accessories 2nd gen only
2
Oct 14, 2003 06:26 PM



-Steve
did you used to have the stock driving lights, if so do feel like getting rid of them
