I'm working on my 08 3500 the scan tools comes up with unable to establish communication with steering angle sensor. i put on a new clock spring didn't help.. the two connector plugs is a white 6 pin connector and a 4 pin connector and the plug part is yellow. Which i assume its for the airbag. i have the 12v positive and i have the ground right around 5 v. and one seems to be a ground also. y'all know what I'm missing? everything works except the steering angle sensor. How does the angle sensor work there's only six pin connector sure could use a little {a lot} help on this thing' sorry I'm not a writer so I'm doing the best i can hope y'all can understand what I'm needing