How To: Multifunction Switch Remove/Clean/Install
#16
Advocate of getting the ban button used on him...
Excellent write up with great pics Shorts!!!
No issues with mine but at least if I do have any I will NOT be going to the dealer!!
No issues with mine but at least if I do have any I will NOT be going to the dealer!!
#18
Advocate of getting the ban button used on him...
#19
Administrator ........ DTR's puttin fires out and workin on big trucks admin
#20
There is no G. There is no G. Repeat after me, THERE IS NO G!
Thread Starter
YAAY! Thanks
#21
Administrator / Severe Concussion Aficionado
#24
There is no G. There is no G. Repeat after me, THERE IS NO G!
Thread Starter
Ok. There is a setting you can check.
1. Go to "User CP" link there at the top left of the page header
2. Go to "Edit Options" link in the left hand menu
3. Scroll down and you will see this. Check the box to "Show Images". Save your settings and you should be good to go.
#25
Thanks Shorts...I checked that the other day and they were on. I turned them off restarted program and then back on. Same result...oh well.
Good news!! The dealer fixed my turn signal as EW. You and this forum saved me money. On the way to pick it up
THANKS EVERYONE FOR THE GREAT HELP!!
Good news!! The dealer fixed my turn signal as EW. You and this forum saved me money. On the way to pick it up
THANKS EVERYONE FOR THE GREAT HELP!!
#30
There is no G. There is no G. Repeat after me, THERE IS NO G!
Thread Starter
Correct, on my 06. Are you certain the wheel has to come off? I did some research before starting my repair. I did find that originally the procedure did call for steering wheel removal. This would enable that big black plastic collar to slip off. However the procedure was amended when it was determined it was an unnecessary step. I will have a look to see if I can find that document.