Check out my Bumper
09-04-2009, 10:35 AM
#1
Registered User
Thread Starter
Join Date: Dec 2008
Location: North Dakota
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Check out my Bumper
Let me know what you think of this bumper please... of course its not on the truck yet but still pretty easy to visualize... with have D-Rings on front as well. It is made with 2" schedule 40 pipe and 3/16" steel for the base.
09-04-2009, 10:51 AM
#4
Registered User
Nope.
Upload them to a site like photobucket. Once uploaded copy the "direct link" and in your post on here click the "photo" (its the one with the mountain and sun square picture thingy) paste in the box they give you and you should be good to go...
Edit... They are now... HOLY HUGE BATMAN!!
Upload them to a site like photobucket. Once uploaded copy the "direct link" and in your post on here click the "photo" (its the one with the mountain and sun square picture thingy) paste in the box they give you and you should be good to go...
Edit... They are now... HOLY HUGE BATMAN!!
09-04-2009, 10:55 AM
#5
Registered User
Thread Starter
Join Date: Dec 2008
Location: North Dakota
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
http://www.cumminsforum.com/forum/3r...ml#post1970453
Trending Topics
09-04-2009, 01:49 PM
#13
Registered User
Thread Starter
Join Date: Dec 2008
Location: North Dakota
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
If there is Demand for one i will definately make the rears...
Right now we are planning on offering the bumper bare as you see it in the pics (with the addition of D-Rings of course) , as well as bedlined and painted options...
We are also offering (not sure on the exact cost) the customer to have there logo or design plasma-cammed into the front bumper
And if we can figure out the details we will also be offering a U weld it kit all plasma cammed out beveled labled and ready to weld up by the end user...
I realize some wont like the design but: Its Immensely strong (the welds are warrantied for LIFE!!!), its alot lighter than the roadarmors (but with thicker steel, this should come in at under 200 pounds), Its customizeable (if you want something done different on it we can and will do it), and BEST OF ALL!!! ----- its cheaper
Right now we are planning on offering the bumper bare as you see it in the pics (with the addition of D-Rings of course) , as well as bedlined and painted options...
We are also offering (not sure on the exact cost) the customer to have there logo or design plasma-cammed into the front bumper
And if we can figure out the details we will also be offering a U weld it kit all plasma cammed out beveled labled and ready to weld up by the end user...
I realize some wont like the design but: Its Immensely strong (the welds are warrantied for LIFE!!!), its alot lighter than the roadarmors (but with thicker steel, this should come in at under 200 pounds), Its customizeable (if you want something done different on it we can and will do it), and BEST OF ALL!!! ----- its cheaper
09-04-2009, 06:08 PM
#15
Registered User
Join Date: Dec 2008
Location: North Texas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
That's is a cool bumper, would it look much better if the front sides wrapped around the front fenders a little? I think that would look killer with this bumper.