A/C selector not working
A/C selector not working
Well it is stuck on the face selection. I move it to defost or feet and nothing happenes. Everything else works but that. Anybody know if it is a vacume system or a electical.
2003 6sp 4x4. 75k on her
Thanks
2003 6sp 4x4. 75k on her
Thanks
jester it a vacum problem.I have a 2000Ram 5.9.Look for a small canister with a vac hose in top and out bottom.It should be about the size of a 35mm film canister or smaller.Mine is located near the firewall on the left side of motor.hope this helps.you can get a smaller replacement at Napa.
Originally Posted by jesterstruck
Well it is stuck on the face selection. I move it to defost or feet and nothing happenes. Everything else works but that. Anybody know if it is a vacume system or a electical.
2003 6sp 4x4. 75k on her
Thanks
2003 6sp 4x4. 75k on her
Thanks
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Sleigher
12 Valve Engine and Drivetrain
11
May 4, 2017 02:12 PM
toolhawk
3rd Gen Engine and Drivetrain -> 2003-2007
1
May 1, 2012 04:18 PM
jesterstruck
3rd Generation Ram - Non Drivetrain - All Years
1
Oct 15, 2006 11:54 PM



