I have just ordered the s67 Smarty and the banks ram air intake complete with the super scoop. I will be removing all exhaust after the DPF (for now) to install a 41/2" magnaflow muffler that will tie into a pair of 5" stacks. I am currently looking for the right EGR and DPF delete kits right now so I can try to do this all at once. Any recommendations for these two items?
Once I get these done what recommendations do any of you have for a monitoring system?

What kind of power expectations should I expect from these mods?
What kind of fuel mileage should i look for?
Any help is greatly appreciated.

2008 2500 QC 4x4 6sp auto 86,XXX miles.

 

Here are the delete hardware your gonna need

http://www.dodge-diesel.org/206egdekitpi.html

Monitoring is a personal preference. I like analog gauges. A good digital setup would be an Edge Insight.

Power expectations are hard to say, but you can expect whatever setting you have the Smarty on, up to say 90HP to show that rating at the rear wheels. Your probably not gonna get 120 or 175 without a bucket of cash and supporting mods.

Fuel mileage should jump 2-3 pending on driving habits.

Good luck and Welcome to the DTR!

 

Thanks for the info Blake, you seem to be Webster when it comes to these mods

(the dictionary guy!)

 

sinister egr kit is a hot ticket since it retains the coolant passage in the center of the head. Flow Pro is a great exhaust and can get a downpipe and delete pipe very reasonably priced.