Why 50hp 110tq loss on the dyno?
04-07-2012, 09:11 PM
#1
Registered User
Thread Starter
Join Date: Jun 2011
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Why 50hp 110tq loss on the dyno?
Last time up on the dyno I was right at 470/940. Today didn't go so good at all. I was 425/826 today... I'm going to check the lift pump pressure and change the fuel filter.
Only differences was an updated program on my Smarty. Same dyno, similar air temp, same everything else. Boost pressure was normal. And water meth that showed zero power gain. Something wrong there but that is another thread.
Only differences was an updated program on my Smarty. Same dyno, similar air temp, same everything else. Boost pressure was normal. And water meth that showed zero power gain. Something wrong there but that is another thread.
04-09-2012, 09:40 PM
#2
Registered User
Thread Starter
Join Date: Jun 2011
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Having worse problems. Truck is loosing power. It will build boost but is not getting fuel. It won't smoke at all. I'm thinking the fuel pump is gone. Might be getting a Fass.
04-09-2012, 10:49 PM
#3
Registered User
Join Date: Jan 2011
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
when i lost power and wasnt getting any smoke it ended up being my OFV. yes i know it a different pump and motor but esentially itwasnt getting fuel. new ofv and a lift pump, the latter perhaps not even being necesary fixed that.
Thread
Thread Starter
Forum
Replies
Last Post
tesla440
3rd Gen High Performance and Accessories (5.9L Only)
4
01-16-2010 07:12 AM
BIGDAN65
3rd Gen High Performance and Accessories (5.9L Only)
4
10-22-2008 07:59 PM
CTDowerTN
3rd Gen High Performance and Accessories (5.9L Only)
4
09-23-2007 09:44 PM