Who's over 600hp with a smarty
Who's over 600hp with a smarty
Stacked or not, who's making 600+ using a smarty as part of the equation. what setting do you run on? What program? If your sig doesn't show your mods, make sure to list them. thanks.
a friend from NW diesel dyno'd saturday at 675 and the rollers were being stingy. lets see. smarty beta, tst 1X0, edge ez level 2. IISPS 62/14/s400 twins, studs, II stage2 Cp3, 90hp sticks, dual feel line, fass, single stack.
I would say Smarty was a small part of that equation.
Quote:
Originally Posted by dodgezilla04
a friend from NW diesel dyno'd saturday at 675 and the rollers were being stingy. lets see. smarty beta, tst 1X0, edge ez level 2. IISPS 62/14/s400 twins, studs, II stage2 Cp3, 90hp sticks, dual feel line, fass, single stack.
I would say Smarty was a small part of that equation.
Originally Posted by dodgezilla04
a friend from NW diesel dyno'd saturday at 675 and the rollers were being stingy. lets see. smarty beta, tst 1X0, edge ez level 2. IISPS 62/14/s400 twins, studs, II stage2 Cp3, 90hp sticks, dual feel line, fass, single stack.
I would say Smarty was a small part of that equation.
Trending Topics
with the recent add ons, I will have to hit the dyno to see. On a single pump, twin turbos, Sp diesel pressure box, Don's sticks and the Smarty, I dynoed 700 HP even. With the water/meth I did 768 and 756 HP.
I am quite sure I have surpassed that point. I will get some new numbers in about 2-3 weekss.
I am quite sure I have surpassed that point. I will get some new numbers in about 2-3 weekss.
With a the Beta 4.2 Smarty alone with my mods I have put down over 625+ alone(not saying actual #'s because of pulling saeson). That is with stock cam, single turbo, one Floor It pump. I run a stack when I pull that helps even more. Also with the tripple stack I lost power turning the TST on! Yes Omaha Smarty has is in it and is going to stay.


