I just installed my quadzilla RP gauge with lift pump kit. All went well . i see 6000-7000 psi idling (rail) and 6-7 PSI idling at lift pump. Is that good for the factory intank lift pump. My truck is a 2004.5 but it has the pump in the tank.

 

sounds normal. Stock pumps have an inline regulator right in the tank. The are designed for volume not pressure.what do you see at WOT?

 

I think you are right on with those numbers. Like syndacate said, how about WOT?

 

im not sure. as i drove around a bit and got her warm i saw a steady 8 psi on lift pump. i will try WOT later today.

 

FWIW, after I got a FP installed on my 05, it idles at a solid 9# and at WOT drops to 6#.
This is on a bone stock truck by the way.
Hope this helps.

 

I have 8 psi at idle and can draw it down to zero with my Bully Dog.
AD100 is next on the "to do" list.

 

I see 8-9 at idle and around 5 at wot

 

i see 8-9 idling psi and WOT down to 4. it had hit 3 once

 

aany1? is 3-5 psi good when i tromp on her?

 

I see 9 to 10psi at idle and 6 at WOT. Not to bad for the stock intank LP.

 

I see 9-10 PSI at idle, and it'll pull down to 4 WOT with the Smarty level 9 at the drag strip.