3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Timing rattle??? HELP!

Old Apr 1, 2007 | 02:12 AM
  #1  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
Timing rattle??? HELP!

I was takeing my friend for a ride in my truck today and he was very impressed. I was telling him if i put my bully dog back to stock it still drove good with almost no smoke, so later on i put it to stock and going from a stop and getting into it i would have a slight ratte for 2 seconds or so and then it would quit. We did this 3 times, hes a truck driver and said it sounded like timing rattle. I switched it back to CL and i didnt hear it anymore? This is really making me paranoid and i have to drive 130 miles back to school tommorow so whats going on? I forgot to mention my edge EZ was on 1 the whole time. He said that maybe with my injectors and twins on a stock setting the timing was to retarded but wasnt quite sure??
Reply
Old Apr 1, 2007 | 02:56 AM
  #2  
morkable's Avatar
Registered User
 
Joined: Aug 2006
Posts: 5,426
Likes: 1
From: Fort McMurray, Alberta
Very good chance that you got some bad fuel, put some good conditioner in it, such as powerup, (something with lots of cetene in it) After another tank it will probably clear up

Kevin
Reply
Old Apr 1, 2007 | 03:03 AM
  #3  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
well it stoped after putting the CL back in and i have power service in it? Im just confused...and really freaked out about my truck going kaboom.
Reply
Old Apr 1, 2007 | 06:57 AM
  #4  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Sounds like a problem with the programming. I would contact Bully Dog.

MikeyB
Reply
Old Apr 1, 2007 | 10:58 AM
  #5  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
when i am driving on stock power, at higher RPM's i hear a slight rattle, especially bad when my EZ is on. what i am talking about is short lived, as soon as the tranny shifts the noise is back to normal.

My truck did it 5 or 6 times yesterday driving on stock power with my bigger turbo. I think its more injector noise than anything. you put CL back on and its fine, so oh well. Mine always acted the same....put more fuel into it and no noise, kinda like it was runnin too lean. oh well. drive back to school with no worries
Reply
Old Apr 1, 2007 | 03:38 PM
  #6  
cquestad's Avatar
Registered User
 
Joined: Dec 2003
Posts: 5,540
Likes: 0
From: Boise, Idaho
Bad programing with the BDDL...maybe like the "Luken" sydrome?
Reply
Old Apr 1, 2007 | 07:01 PM
  #7  
abc4yew's Avatar
Registered User
 
Joined: Jan 2004
Posts: 2,696
Likes: 1
From: Maritimes, Canada
ACook, our little plan is working....just kidding....If it went away with the CL then don't worry about it. Sounds like your truck is addicted to power and when you go back to stock the ECM goes to toopid. ks
Reply

Trending Topics

Old Apr 1, 2007 | 10:10 PM
  #8  
morkable's Avatar
Registered User
 
Joined: Aug 2006
Posts: 5,426
Likes: 1
From: Fort McMurray, Alberta
Mine will do it every so often. But as I said, it is usually if I dont put in enough of the power up. Or if I use a different brand. I have found that the power up IMO has the most cetene per 100ml that I can find.

And what really makes that weird, is sometimes it will go away if I put the edge to 5

Kevin
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RonP
3rd Gen Engine and Drivetrain -> 2003-2007
6
Apr 2, 2007 12:25 PM
templer
3rd Gen High Performance and Accessories (5.9L Only)
10
Jan 24, 2007 12:16 PM
Buffalo
3rd Gen High Performance and Accessories (5.9L Only)
24
Jan 3, 2006 05:28 PM
foley
3rd Gen High Performance and Accessories (5.9L Only)
3
Jun 1, 2005 03:54 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:22 AM.