Dodge Diesel - Diesel Truck Resource Forums

3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

stacks and linex

   
Old Oct 31, 2007 | 09:23 PM
Share
  #1  
SMOKIN-U's Avatar
SMOKIN-U
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 439
Likes: 0
From: missouri
stacks and linex
i am wanting to put stacks on my truck, but aslo would like to get the bed linexed. Does anyone know if the heat from the stacks will melt a spray in bed liner? thanks in advance
Reply
0
Old Oct 31, 2007 | 09:33 PM
Share
  #2  
Patriot_Auto's Avatar
Patriot_Auto
Registered User
 
Joined: Oct 2007
Posts: 168
Likes: 0
From: Atlanta, IL
I wouldn't think the heat would effect it that much in the short run. Maybe use a piece of stainless plate around the stack on the bed floor to prevent any heat damage.
Reply
0
Old Oct 31, 2007 | 10:02 PM
Share
  #3  
morkable's Avatar
morkable
Registered User
 
Joined: Aug 2006
Posts: 5,426
Likes: 1
From: Fort McMurray, Alberta
no problems with mine so far

Kevin
Reply
0
Old Oct 31, 2007 | 10:06 PM
Share
  #4  
bnold's Avatar
bnold
Registered User
 
Joined: Oct 2005
Posts: 2,184
Likes: 0
From: Dallas area
No issues with mine
Reply
0
Old Oct 31, 2007 | 10:12 PM
Share
  #5  
Little03's Avatar
Little03
Registered User
 
Joined: May 2006
Posts: 348
Likes: 0
From: Fort St John B.C
When I had Stacks i didnt have any issues.

nick.
Reply
0
Old Oct 31, 2007 | 10:16 PM
Share
  #6  
SMOKIN-U's Avatar
SMOKIN-U
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 439
Likes: 0
From: missouri
thanks for all the opinions guys looks like i just might pull the trigger and do them both
Reply
0
Old Oct 31, 2007 | 10:22 PM
Share
  #7  
RamWheelsBy4's Avatar
RamWheelsBy4
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
I have seen a lot of stacked trucks with line-x at the track and never seen one that seemed bothered by the heat.
Reply
0

Trending Topics

Old Nov 1, 2007 | 07:32 AM
Share
  #8  
goodeyesniper75's Avatar
goodeyesniper75
Chapter President
 
Joined: May 2006
Posts: 1,253
Likes: 0
From: Kinnelon,NJ
mine are about 1/2'' from the liner and not problems....
Reply
0
Old Nov 1, 2007 | 09:11 AM
Share
  #9  
53 willys's Avatar
53 willys
Registered User
 
Joined: Mar 2005
Posts: 6,259
Likes: 1
From: Utah
no problems here either
Reply
0
Old Nov 1, 2007 | 09:14 AM
Share
  #10  
cbrahs's Avatar
cbrahs
Chapter President
 
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
i don't even have problems with my plastic drop in liner. going to kill the drop in and go line-x on mine.
Reply
0
Old Nov 1, 2007 | 10:08 AM
Share
  #11  
BlueDragonUSMC's Avatar
BlueDragonUSMC
Registered User
 
Joined: Sep 2007
Posts: 25
Likes: 0
From: Arvada,CO
Just grinding the Line-x to weld the brackets was the only problem I ran into
Reply
0
Old Nov 1, 2007 | 10:18 AM
Share
  #12  
JD Dearden's Avatar
JD Dearden
Banned
 
Joined: Apr 2006
Posts: 1,841
Likes: 1
From: Been deported back to Utah
Originally Posted by SMOKIN-U
i am wanting to put stacks on my truck, but aslo would like to get the bed linexed. Does anyone know if the heat from the stacks will melt a spray in bed liner? thanks in advance
drill the hole than linex your bed that way it is sealed ya know
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
who had linex around the fenders and down the rockers (gold truck)
1985cucv
3rd Generation Ram - Non Drivetrain - All Years
4
May 9, 2009 06:12 AM
LineX and PE Full Metal JackRabbit installed
MrSlug
3rd Generation Ram - Non Drivetrain - All Years
10
Jan 24, 2007 02:40 PM
LineX
Mark Hodowanec
3rd Gen High Performance and Accessories (5.9L Only)
4
Sep 21, 2004 06:43 PM
LineX or Rino or Signature Brand????
nicksort
Performance and Accessories 2nd gen only
16
Jul 3, 2003 04:37 PM
Back to Subforum
3rd Gen High Performance and Accessories (5.9L Only)
View Next Unread
Melted Brite Box...


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 04:25 AM.