What's on the horizon for Smarty in 07'???

Any chance we'll see Smarty providing programming capability of additional
features (accessory delay, high idle, daytime running lights, etc.)???

Chuck

 

Smarty has always had high idel.

 

bump good question

 

Dumb question, how do I enable/use my high idle?

 

With the SMARTY it should be enabled. To check put the truck in park, set the parking brake, and hit the cruise control ON and then hit SET. The idle should bump up to 1k rpms. To disable just tap the brake pedal.

MikeyB

 

Right....realized that after posting, then decided to leave it as an example.......

 

Mine works without setting parking brake....I think the key is don't touch brake or go-fast pedal when first starting up.

Chuck

 

The parking brake is for the safety **** in me.

MikeyB

 

Ok, what am I doing wrong, mine doesn't work? Smarty #7 is installed, I started the truck(not touching anything), I pushed the cruise ON button, cruise light came on, I then hit the SET button and nothing, I then tried holding SET down longer and nothing. I tried w/ the parking brake on and off, and got nothing. What's the deal???

 

I am not 100% sure, but I think that our 03's only work whent he temp is a certain low outside. Not all the time. Also, if you let it sit and idle, it will kick the RPM up to a grand also, mine does this, and the high idle at start has worked once in the morning when cranked up, but it was enable by itself, no doubt becuase it was 5* that morning outside. Only morning that is has been taht cold here. Everything else has been high 20's and up.

 

That is not the adjsutable high idle...

It should work.

 

Only for the Auto Tranny My 2006 6 speed will jump to 1K when cold after a minute or so till it's warmed up.

 

Well, I guess no high idle for me. Or is this something I should have the dealer program in???