3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Smarty power, how much?

Thread Tools
 
Search this Thread
 
Old Jun 4, 2008 | 03:33 PM
  #1  
O.T's Avatar
O.T
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 685
Likes: 0
From: Home of the Beaver
Smarty power, how much?

Trying to get a idea what kind of numbers the Smarty has produced on its own. I know many are stacking with the TST or a pressure box.
Smarty only power and Smarty and other/

I'm trying to decide if I want to add the TST to the mix.

Thanks eh!

o.
Reply
Old Jun 4, 2008 | 03:47 PM
  #2  
cbrahs's Avatar
Chapter President
 
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
I have just the smarty, version 4.11, stock tq mgt, laid down 405.1 (level 3) and 859 tq (level 5). Still waiting on the tranny to be completed or i would have gone to higher levels and went the new REVO program
Reply
Old Jun 4, 2008 | 04:29 PM
  #3  
lcaad1249's Avatar
Registered User
 
Joined: Dec 2004
Posts: 208
Likes: 0
I was trying to find exact numbers and I don't remember which software it was for the Smarty, but I picked up about 50 HP with the TST.
Reply
Old Jun 4, 2008 | 04:33 PM
  #4  
O.T's Avatar
O.T
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 685
Likes: 0
From: Home of the Beaver
Originally Posted by lcaad1249
I was trying to find exact numbers and I don't remember which software it was for the Smarty, but I picked up about 50 HP with the TST.

good stuff
Reply
Old Jun 4, 2008 | 04:42 PM
  #5  
Hintz's Avatar
Registered User
 
Joined: Jul 2005
Posts: 988
Likes: 0
From: Georgia... Iowa Bound
Originally Posted by onetun
good stuff
Id wait on the TST, b/c theyre are coming out w/ a TST specifically for use in stacking w/ the smarty
Reply
Old Jun 4, 2008 | 04:43 PM
  #6  
Cummins610's Avatar
Registered User
 
Joined: Aug 2007
Posts: 780
Likes: 0
From: Alberta
456/956 with the truck in my sig minus the fass and CFM+. Smarty#7,4.09;2.11
Reply
Old Jun 4, 2008 | 04:49 PM
  #7  
chrleb1's Avatar
Registered User
 
Joined: Nov 2006
Posts: 742
Likes: 0
From: Riverdale, CA
On a customers 06 it did 488 by itself with some other supporting mods. Stock fuel system, HTT 62/71/13 SS, AFE stage 2, MBRP 5" t-back, Smarty 4.3sl on 9 (7 did 479), and a full built tranny. Before adding the tranny and turbo, it did 423 with 4.11 on 9. These numbers are on a Dynojet 248.
Reply
Old Jun 5, 2008 | 12:27 AM
  #8  
Tacsavage's Avatar
Registered User
 
Joined: May 2005
Posts: 308
Likes: 0
From: Kingsport, TN
4.11 on #9, tst turned off 450hp, 900 torque with my mods.
4.11 on #9 stacked with TST and almost no rail pressure (level 1) made 520hp about 1000 torque. Tac
Reply
Old Jun 5, 2008 | 01:47 AM
  #9  
TexasCTD's Avatar
Registered User
 
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
With my Smarty on level 9........older original version........I made 466 on one dynojet and 467 on a different one a few months apart, stock turbo and inj.

Later.....with the TS-Performance MP-8 on 100 percent it made 494 on yet another dynojet.

The numbers in my sig were on a "dyno com" dyno.

..
Reply
Old Jun 5, 2008 | 11:22 AM
  #10  
PRO-NRA's Avatar
Registered User
 
Joined: Nov 2006
Posts: 337
Likes: 0
From: Sacramento, CA
On the mobile Dynojet at last May Madness the truck on my sig with a version of software prior to Revo laid down just 396 HP on SW #6.
Reply
Old Jun 5, 2008 | 11:44 AM
  #11  
ropnjessi's Avatar
Registered User
 
Joined: Apr 2007
Posts: 225
Likes: 0
From: NV
Originally Posted by Tacsavage
4.11 on #9, tst turned off 450hp, 900 torque with my mods.
4.11 on #9 stacked with TST and almost no rail pressure (level 1) made 520hp about 1000 torque. Tac
Tacsavage, what was your TST set up on the second run?
Reply
Old Jun 5, 2008 | 02:22 PM
  #12  
jwb600's Avatar
Registered User
 
Joined: Jan 2006
Posts: 3,597
Likes: 0
From: Indiana
on my truck with a stock turbo no other mods it made 461 to the wheels. just some supporting mods, pump tranny etc. I ran a power puck for a while and took it off and the horsepower on the dyno was the same with just the smarty so I guess the pressure box wasnt working. my truck is an 06.5 so the tst didnt do to well it made 490hp with the smarty/tst stacked and a turbo. removing the tst and adding injectors it went up almost 200hp to the wheels. mine runs alot better without the tst I wish they would get it fixed. on my 05 the tst killed the juice in power it ran alot stronger. for 03-05 trucks the tst is very mean but for my truck it just didnt run very well it would drain the rail down badly if you would run it up any at all
Reply
Old Jun 5, 2008 | 03:24 PM
  #13  
dodgezilla04's Avatar
Banned
 
Joined: Jun 2004
Posts: 0
Likes: 1
From: kingston,wa
Rob, at BD in april, i only ran the smarty, tnt version, and got the 578... the quadzilla was only on there for the rail pressure gauge.

and byron got 640 something last saturday with only smarty
Reply
Old Jun 6, 2008 | 07:02 PM
  #14  
Jason_K's Avatar
Registered User
 
Joined: Jun 2006
Posts: 761
Likes: 0
From: Central Pennsylvania
a few months ago i ran 433hp and 813tq on a superflo with 4.11 sw9, tm wild, and stock turbo. now i want to get on one to test the tnt, and new turbo
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cody323
3rd Gen Engine and Drivetrain -> 2003-2007
5
Oct 19, 2008 04:24 PM
jjrightmire1973
3rd Gen High Performance and Accessories (5.9L Only)
5
Aug 12, 2008 04:29 PM
J-man
3rd Gen High Performance and Accessories (5.9L Only)
8
Dec 22, 2007 10:45 PM
redneck rebel
3rd Gen High Performance and Accessories (5.9L Only)
2
Mar 17, 2007 12:36 PM
bnold
Performance and Accessories 2nd gen only
39
Jun 4, 2006 08:21 AM




All times are GMT -5. The time now is 09:49 AM.