I will be picking up the SMARTY at the Post Office today and would like to know which version program works best for the 6spd. Somewhere I read that version 202B is the best setup for the manual and just want to make sure.

Thanks

MikeyB

 

202B is the loaded software at time of shipment. enjoy

 

#1 get ready for SMOKE!

#2 get ready for a CLUTCH

#3 get a fuel system, I drop fuel pressure with the Smarty on 3 and the EZ on 1! (I haven't put the FASS in yet)

I am running the version with stock TQ management. I haven't tried any others, but I love it. I bought mine from 973604x4 because he didn't like it on his truck, but he LOVES it on mine. Let me know if it fuels real hard on the top end, you WILL notice it. It seems to do it on some trucks and not on others

ENJOY!

 

smarty killed my clutch. it should be outlawed. Just kidding, dont do anything like that. i loved it.

 

Well, I'll try not smoking the clutch....yet...

MikeyB

 

good luck. I got $10 that says you will not be able to refrain from hurtin that poor little clutch. LOL .

 

you'll hurt your clutch coming out of the driveway

 

The torque management in the stock program is cheaper than putting in a decent clutch. Do you think a Valair ofe will hold Catcher #9?

 

I didnt think manuals had tq management?

 

I've been running the bata version "Smt3e306502" seems to be smoother than the latest update, and no timing knock with TST.

I tried the latest update and it sounded like crap with the TST on.

Rick D

 

Rick,
Do you get the beta programs from Bob or Marco?

MikeyB

 

They must. My Bully Dog Power Pup slipped my clutch on Extreme. Performance mode was ok, too much smoke for in town. Tow mode was ok too, but I was not impressed.

With the Smarty, I thought I could handle #5, 90 hp w/timing. I really liked the performance, but it slipped the clutch if I was into past 2500 rpm. I reprogramed to #3 and it still slips if I am too agressive. At least I do no have to back out of it so much. I still haven't gone WOT with the Smarty! It would fry my clutch and it has been abuse too much already.

I gotta find someone in Phoenix that can do clutch work. Get a couple of days off of work to get it installed. One day for installation and one day enjoying it.

 

Mikey,
I looked around and it does'nt seem to be available anymore, if you want to try it i'll stick in in my web site somewhere so you can download it.

Rick

 

Geezzz, reading about all the slipping clutches around here I might put my name on ValAir beta tester program.

Rick,
Let me know if you can get the beta program uploaded.

MikeyB

 

I'm running a SBC Con FE with no problems...... Rick