Should i get stacks
#16
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
ok ya got me. Kind of partial to the stacks.
The guy I got the stacks from had a box behind the stacks and it didn't look too bad. tuck the stacks into the far corners as close as you can. make sure you make a cover so that when things get close they don't get burnt on the pipes.
The guy I got the stacks from had a box behind the stacks and it didn't look too bad. tuck the stacks into the far corners as close as you can. make sure you make a cover so that when things get close they don't get burnt on the pipes.
#17
Registered User
Here are mine. I went with the mbrp 6" mitre setup. If you pull trailers, you better have patience for noise, especially at about 70-75mph or 2200rpm. I wouldn't have it any other way though.
#20
Registered User
All the normal websites sell it for the same price. Usually $543 + $120x2 for mbrp and then shipping (alot of websites offer free shipping) I got mine from a local shop that made me a deal to buy it from him and have him install it.
#22
Registered User
Got mine for 750. I also spent an additional 75 for drop-in mufflers. No noise reduction but at 65 towing, the drone is a little less. So for 675 with no mufflers seems about the going rate
Jon
Jon
#23
Registered User
Can you fill em with SMOKE?
If you cant then spend your $$$ on getting smoke first.
Stacks without smoke are like Peas without Carrots
I will have 7" stacks on my truck as soon as I have enough smoke to fill them.
![guitarist](https://www.dieseltruckresource.com/forums/images/smilies/guitarist.gif)
![Cool](https://www.dieseltruckresource.com/forums/images/smilies/cool.gif)
![No No](https://www.dieseltruckresource.com/forums/images/smilies/new1/nono.gif)
![CoffeeTime](https://www.dieseltruckresource.com/forums/images/smilies/new1/coffeetime.gif)
Thread
Thread Starter
Forum
Replies
Last Post
nfsommer
3rd Gen High Performance and Accessories (5.9L Only)
21
04-04-2007 03:45 PM
tywebb3
Performance and Accessories 2nd gen only
3
06-23-2006 11:30 PM
rockittboy
3rd Generation Ram - Non Drivetrain - All Years
9
02-03-2006 12:38 AM