rokktech sensor question
rokktech sensor question
i received my sensor today. i thought i read from previous posts that a section of the sensor gets ground down. mine looks the same from when i sent it to them. any imput? thanks
It should be different
I thought that too but if you look at them closely you will notice a small difference. The one that you pulled out fo the truck should have an O-Ring and an O-ring chanel. The new one should not have an O-ring and the O-ring channel should be missing on one side. I hope that this helps. Let me know if you have any more questions.
John
John
mine had a flat spot on it. it is re painted so it is not like ther is a section that is just ground off. post in some pics if you can.
if not I would call them. if there is no play in the hole then I don't see how you could advance the timing.
if not I would call them. if there is no play in the hole then I don't see how you could advance the timing.
ROKK install
Hey man,
You should be able to install it almost all the way and then move it around (clockwise). This will advance the timing. I actually installed it without really looking at the play, noticed some small amount of knocking a week or so later (when it got cold out) so I backed it off. This is where I noticed the adjustment. If you tighten the bolt down just enough so that you can move the sensor clockwise and counterclockwise without it wiggling, you will notice the adjustment. Just put it in and advance it as much as you can (clockwise) and use this as a base line. I noticed a good amount of power from it. My tires actually chirped into second gear. It is a nice deal. Good luck and post us if you have any questions..
Jake
You should be able to install it almost all the way and then move it around (clockwise). This will advance the timing. I actually installed it without really looking at the play, noticed some small amount of knocking a week or so later (when it got cold out) so I backed it off. This is where I noticed the adjustment. If you tighten the bolt down just enough so that you can move the sensor clockwise and counterclockwise without it wiggling, you will notice the adjustment. Just put it in and advance it as much as you can (clockwise) and use this as a base line. I noticed a good amount of power from it. My tires actually chirped into second gear. It is a nice deal. Good luck and post us if you have any questions..
Jake
Guest
Posts: n/a
I am waiting on
my shaved piece of plastic and can't wait.... 
It is shaved so you can advance the timing, by turning clockwise? so there is no way by moving it around I could turn it too far (counterclockwise) and actually end up with a more retarded engine then stock? haven't seen one just wondering.

It is shaved so you can advance the timing, by turning clockwise? so there is no way by moving it around I could turn it too far (counterclockwise) and actually end up with a more retarded engine then stock? haven't seen one just wondering.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mopar72
3rd Gen High Performance and Accessories (5.9L Only)
5
May 21, 2006 06:36 PM
Big Bob
3rd Gen High Performance and Accessories (5.9L Only)
4
Nov 8, 2005 12:41 AM
BigBlue
3rd Gen High Performance and Accessories (5.9L Only)
39
Oct 25, 2005 09:33 PM
isissound
Performance and Accessories 2nd gen only
1
Oct 16, 2005 09:34 PM
Tiara3100
3rd Gen High Performance and Accessories (5.9L Only)
2
Sep 11, 2005 10:50 PM



