Thanks to omaharam helping me, I got my new Quad X2 standard and commander installed last night. I do have a couple of questions:

1. I don't get any injector pressure readings. It this part of the fuel pressure kit or should I get readings with the standard commander?

2. Jeremy at Quad said I could tow using the 65HP or lower settings. I have a 10K fifth wheel and was wondering what settings others have found the best for towing?

 

OK, one more. Is rail pressure the same as injection pressure?

 

Yes the injection is the same as the rail pressure.

 

As far as towing omaharam can vauge for what I and his brother inlaw do here.
i my self like the 40hp setting over the 65hp just seems better feeling for me any way. I pull about 9000 in 100+ degrees at 6-7% and I can keep the egts arround 1250-1300 at 60mph> up hill and 40 just seems to be more peace of mind. Now I have pulled on flat groung trips and 65 does do real nice egts creep alittle quicker. Just food for thought.

 

After speaking with Quadzilla, the rail pressure monitoring is part of the fuel pressure kit.