hi guys

anybody have installed this item with rail gauges?

thanks

chris

 

I have the x2 race with the commander and fp + rp kit.

I like the set-up, but am on a waiting list for a heavy duty fp sending unit from Quadzilla.
My fp jumping all over the place - Justin from Q'zilla said it was the fp sender - give them a call and see if they will send you the kit with the upgraded sender.

Great product and service

 

All of the adjustable ones come with a built in rail gauge.

 

hi qzilla

if plug and play? the rail gauges?

i have order the x 2 adj. on dtr shop yesterday.

chris

 

Yes I do believe the rail gauge is plug-n-play.

 

Yes it is it take place of the old rotorey *** that adjust power. If you put the x2 in by pass the rail preasure will not read it needs the x2 for that. I found that out the other day.

 

hi guys
i have installed x2 answome power with smarty!!!

but the rail pressure jump around on idle from 4800 to 5600!
if this normal?

i jump also wen i drive.

best regards

chris

 

anybody can help me?

 

At idle my RP is about 6700 and jumps +- 200.
Driving down the highway it bounces a little but not bad.
Remember you are seeing the real time reading not an average.

 

but mine jump more than +- 200

 

Mine jumps a bit but I don't really worry about it b/c when I'm in a good pull up a mountain at 75mph it's reading 27,500+or- 200. And that's when I really care about my pressure. So, I think you're just worrying too much about the little stuff.