programmers and xzillaraider
Can you have him call our tech line and give them the serial numbers? I doubt he bought them direct through us and without them it will be impossible to track them down. Most of our WD's only send stuff back every few moths when they have a decent handful of them that warrant a shipment.
TCR,
Yes, start the truck with the switch in the off position. Then disconnect the switch. If you watch the LED it will turn green when you do this. See if the idle changes at all.
Under-Pressure,
I still need those serial numbers, I cannot really make them out from the pictures. I can get clos but, it would be much easier to get the right ones if you could post them up for me. Thanks.
Yes, start the truck with the switch in the off position. Then disconnect the switch. If you watch the LED it will turn green when you do this. See if the idle changes at all.
Under-Pressure,
I still need those serial numbers, I cannot really make them out from the pictures. I can get clos but, it would be much easier to get the right ones if you could post them up for me. Thanks.
When I disconnect the plug to the s/w, my rough idle comes back just like switching to level #1. What's next?
Quad is by far the best Customer Support Based Company that I have ever seen! I have no issues with my Quad XZT but I know that if I did they would be there helping me once (I CALLED THEM AND ASKED)!!!!!! Some people????? OTHERS!!!!! Good Day JB
Thread
Thread Starter
Forum
Replies
Last Post
CalypsoCowboy
3rd Gen High Performance and Accessories (5.9L Only)
3
Mar 13, 2008 06:13 PM
usmcduncan001
3rd Gen High Performance and Accessories (5.9L Only)
2
Sep 14, 2007 04:10 AM
Igor
3rd Gen High Performance and Accessories (5.9L Only)
8
Dec 5, 2006 08:23 AM
Smokeman
3rd Gen High Performance and Accessories (5.9L Only)
4
Nov 16, 2006 10:33 PM
ocsurf16
3rd Gen High Performance and Accessories (5.9L Only)
9
Oct 6, 2006 07:43 PM



