Anyone have this happen to them? My pyro says 1832 at idle, water temp says 273, and the trans temp which isn't even hooked up yet is giving me a reading. Triple checked wiring and all looks good. What gives?

BTW, I have already called Quadzilla and am still waiting for return call.

 

Bad ground.

1832deg is what it will read if nothing is connected to the thermocouple. That might be the problem with the whole thing.

 

I have tried 3 grounding points and even straight to the battery and no difference. Anymore ideas?

 

I am actually getting 32 degrees with the thermocouple disconnected. I get about 690 with it hooked up and engine off. With engine on it goes to 1832 in about 2 minutes.