MBRP Muffler install
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: Katy, TX
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
MBRP Muffler install
My stocker rusted out at the tailpipe flange so I got a MRBP replacement. I got just the muffler and it seems to be a little to long. Has anybody hung one, I assume they have, and should I just trim about 7" off the tailpipe so everything lines up right?
#2
I had to trim about 3-4" off mine, just keep taking a few inches off at a time and fit it up. Mine could probably be 1-2" shorter but I can hang the tail pipe on the hangers with no issues. Think you'll like the muffler.
Sawzall makes things easy, started out with a regular hack saw and said heck with that
Sawzall makes things easy, started out with a regular hack saw and said heck with that
#3
DTR 1st Sergeant
The extra length is there as not every application is the same; so you do have to cut some off. It is much easier to trim the excess than it is to get out the "tail pipe stretcher"
Thread
Thread Starter
Forum
Replies
Last Post
01350banshee
3rd Gen High Performance and Accessories (5.9L Only)
11
03-04-2011 09:12 AM
wcbcruzer
Performance and Accessories 2nd gen only
6
08-13-2008 10:34 AM
Dodgezilla
3rd Gen High Performance and Accessories (5.9L Only)
14
08-08-2006 04:08 AM
djja918
3rd Gen High Performance and Accessories (5.9L Only)
13
07-31-2006 06:33 PM