Lift Kit Question
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: New Jersey
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Lift Kit Question
Hello I am looking to install a lift kit and am not sure what one to use. I am not looking to cut and weld any thing on the truck. I wanted to know for people who installed a lift kit which one they recommend installing I have a 2" leveling kit on the front but it is not helping when I put on the 22.5 wheels it is rubbing on the back of the front fender on a turn. What kit gives the best bang for the buck (ride quality, and just over all quality).
#3
Registered User
Join Date: Jun 2004
Location: No, Fl.
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
I have 22.5's with 36.9 Hankook tires on my 2wd dually. I am using a Daystar two inch leveling kit with almost no rub at all. The only rub I get is going into very uneven driveways on a full lock turn.
#4
Registered User
Thread Starter
Join Date: Dec 2006
Location: New Jersey
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
I do not think i would go over 6 inches in a lift kit. I think you would have to do some drive line modification or you would wind up with problems from what i have been reading.
#5
#6
i have a six inch tuff country lift and i dident have to do any thing to the drive line. rides nice i have 22 on 37" 13.50 kuhmo mt
2005 2500 ctd airaid intake, cfm intake manifold, 5" tbe magnaflow 6" tuff country lift 22 on 37 13.50 kuhmo mt
2005 2500 ctd airaid intake, cfm intake manifold, 5" tbe magnaflow 6" tuff country lift 22 on 37 13.50 kuhmo mt
Thread
Thread Starter
Forum
Replies
Last Post
sgtdiesel
3rd Gen High Performance and Accessories (5.9L Only)
25
06-26-2012 02:37 PM
mudder500
3rd Gen High Performance and Accessories (5.9L Only)
5
07-29-2007 12:27 PM
doomgaze
Performance and Accessories 2nd gen only
1
04-13-2006 01:21 PM
lucey
3rd Gen High Performance and Accessories (5.9L Only)
8
04-21-2005 09:53 PM