Would i be able to get away with putting 33x13.5X20 on my truck with just a leveling kit, or would there be some rubbing issues???

Jake H.

 

Depends on the wheel. But u should be ok with 33's. Heck I run 37's with a 3" lift.

 

The 13.50 wide tire might be an issue..........are you using the stock wheels?

 

D45 i don't think the stock wheels come in 20's lol.

 

i have a leveling kit with nearly 34x12.50's on 18x10's no rub at all.

 

i don't think its the 33" part that will cause the rubbing cause 35" tires with a leveling kit work just fine, its the 13.5 width thats the problem.

 

I have 325 x 60 x 18 Nito Grapplers on my truck. I had to remove the mudflaps. The tires are 33" x 12 3/4". I have a 2" levelling kit. No rubbing now. My wheels are 18 x 9".

 

i have 35-12.5 and a 3" lift in the front and stock 17" wheels and i get rub if i turn full left or right.

 

You should be fine with 20x9 or 20x10. IMO, 20x9. I am running 33x13.5x18's (18x9 wheel) with just a leveling kit. The Mickey ATZ's I have run pretty true to size and are a bit wider and taller than my previous Nitto's (same size). So, you should be ok with whatever tire you go with as well.....unless you go with a Bogger or other brand with large lugs. They might hit on full lock.

 

BTW...forgot to mention. I have plenty of clearance. Good luck, it will look good.

 

here ya go, plenty of room.....

 

I love quad cab long beds that's an awsome truck

 

Hey thanks bud, now that its set up closer to what I want, driving it becomes much more enjoyable.

 

jamesbfishin, thats a heck of a nice looking truck...almost like mine except i just have a short bed..thanks for the pics it really will help me decide

Jake H.

 

I just bought a set of Pro-Comp 6005's 20x9.5 with 305/55/20 Dick Cepek FCII's and they fit with no rub. These wheels have a 5.25" backspace and boy do they look sharp. http://www.4wheelparts.com/Wheels/Xt...=PXA6005-29582