well for the last 2hrs and 15mins i pulled the injectors and are sending them to don tomorrow... cant wait to get them back... i have been waiting along time for this... flux 2.5's here i come

 

You are going to like them... I bet you run out of turbo though.

 

my injectors are down at dons right now, hopefully they will be done today, i am only getting flux 1, cause price of diesel in canada is nuts, I cant wait to get them back to see how they are going to work already been without my truck for 2 weeks and it really sucks exspecially having to drive the wifes van. L.O.L!!!

 

???? what do you mean i might run out of turbo... you saying those flux's might push to much boost to run efficently

 

fullbore,

Are these the injector set in which 4 needed rebuilding or ?

 

Don should be getting mine today. I don't even know what stage I'm getting . Just want Don to do his magic

 

Lets just say I think you will be turning your electronics down to keep egts in a safe range. You will make a lot of power with just 2.5's alone. I know

 

yes don mine are the set that needed 4to be rebuilt

 

I didn't see a modded CP3 in his sig. I think he will probably run out of fuel before the turbo/EGT's become an issue.

 

OK, we got them apart and cleaned. I wont have them ready to ship until tomorrow.

 

ok thanks don i appreciate this i cant wait to try them out

 

DON,

I don't have any way of contacting you other than on the message board

Can you ship a rail cap back with my injectors? I'd like to do some testing with/without II's dual feed line.

J.P.

 

over nighted the injectors this morning... he should get them tomorrow by 10:30 $76.00 to over night hope there is nothing wrong with them so i can get them back super fast

 

Can you go into more detail about this? I was originally planning to go with flux 2's, but then I found out about the 2.5's. I hear the economy/mpg difference between the two are not much different...Don??

Also, I just put a 62/71/13ss turbo on my truck, would that mean I would haven an even harder time keeping the EGT's managable than the guy with the 64 mentioned above? I run my Smarty 4.4beta on lvl 9 and turn my quad X2 (race/stack) on lvl 2 (100hp..I dont have the update cable), will this much programming/chip be an issue with my setup if I get the 2.5's or even the 2's for that matter? FYI the Quad only comes on for the track/street drag.

 

i will give you a post install report on how i like them, boost, smoke, and egt's also i hope to dyno as well