Intake
#1
Registered User
Thread Starter
Join Date: May 2005
Location: Edmonton, Alberta, Canada
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Intake
I run an Airaid drop in, torque tube, and a swiss cheesed airbox. Will going to an Airaid or similar intake make much of a difference? Or would the performance gains be only noticeable compared to stock?
#2
If you only have the Edge EZ, I don't think you'll see any difference. The swiss cheese airbox should allow plenty of air to flow through the drop in Airaid. Now if you were going to stack another box such as the TST PMCR on top of the EZ, I would recommend replacing it with the whole intake. I run the Airraid intake and like it, but if I were going to do it again, I would go with the AFE PG7.
Anyway, you're fine until you add more power.
Anyway, you're fine until you add more power.
Thread
Thread Starter
Forum
Replies
Last Post
D45
3rd Gen High Performance and Accessories (5.9L Only)
17
12-06-2007 01:52 PM
natlchamp2k4
Performance and Accessories 2nd gen only
3
03-13-2007 05:47 AM
BA05'CTD
3rd Gen High Performance and Accessories (5.9L Only)
4
01-07-2007 03:08 PM
dodgezilla04
3rd Gen High Performance and Accessories (5.9L Only)
4
07-01-2006 01:28 AM
Bobcat698
Performance and Accessories 2nd gen only
4
09-24-2005 10:51 AM