I need your help customizing my 3500
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: Saskatoon, SK Canada
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I need your help customizing my 3500
Hey guys I need help with adding some stuff to my 04.5 3500.
I have basics like AFE stage 2 and Edge but looking for some ideas on exterior customizing. New wheels and rims are a little steep also thought about lifting and/or levelling kit but then she won't fit inmy garage and when it gets -40 celcius here I need the garage!! I have added chrome door handles since this picture.....
Let me know what you all think
Thanks
I have basics like AFE stage 2 and Edge but looking for some ideas on exterior customizing. New wheels and rims are a little steep also thought about lifting and/or levelling kit but then she won't fit inmy garage and when it gets -40 celcius here I need the garage!! I have added chrome door handles since this picture.....
Let me know what you all think
Thanks
#2
Front and rear bumpers, headache rack w/lights, toolbox, NFAB steps to match, and offroad lights front and rear (headache rack). exhaust, turbo back, and chrome tip. smoke clearance lights, HID's. I would go black on that color instead of chrome (other than the tip). It will look good!
#3
Registered User
Black out the area between the side windows (B-pillar)... Since you already have tinted windows, then this should give the truck a little bit of a chopped roof look. Just take it to a decal shop and have them lay some black tape over that area to where it looks like it's one big side window instead of front and rear. If you decide you don't like it, all you have to do is pull it back off..
I have been wanting to do this to my truck but just haven't had the time to drop it off at the shop...
I have been wanting to do this to my truck but just haven't had the time to drop it off at the shop...
#5
Registered User
Thread Starter
Join Date: Oct 2007
Location: Saskatoon, SK Canada
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Yes that is very true, I have the bigger Nitto terra grapplers on there now (not sure the size) and they do help allot with the look. Fill up the area nice.....
I was also thinking bull bar or full brush guard but I really like the look of the tow hooks and don't want to remove them
I was also thinking bull bar or full brush guard but I really like the look of the tow hooks and don't want to remove them
Thread
Thread Starter
Forum
Replies
Last Post
Totallyrad
Other
15
09-20-2013 04:31 PM
ptgarcia
3rd Gen Engine and Drivetrain -> 2003-2007
37
02-29-2008 11:46 AM
jeffcall7
3rd Generation Ram - Non Drivetrain - All Years
7
03-16-2007 04:38 PM