Installed a new HTT intercooler at the shop this weekend. Installation time was under 1 hour. Quality and fit was outstanding. Did not need to remove the bumper or discharge the a/c. Had to remove about 1/4" off one bumper bolt to keep it from touching the drivers side tank but that was it. Way better fit than my Spearco, for the money probably the best intercooler available. Tim

 

thanks for the great review on this new product tim

that new intercooler looks tight !

typical HTT quality

 

I just got mine Friday too. Nice polished finish. One heavy mother though. The tanks must be 1/4" thick.

 

Have you had any time to do testing Tim? If so what and how much of a diff have you seen?

 

I found on mine it lowered the cruise EGT's about 125-150 degrees. My max EGT's on the street are 1100ish at WOT while running empty. I did get around to pulling the 32' camper the other day also. I was quite impressed to say the least. With the smarty on level 9 and towing with the 4.3's, the EGT's were very manageable. They never got out of control and I had pleeennnttty of power for the pull.

 

I heard about that thing...is it a 3rd Gen only deal, or are they making one for 2nd Gens?

If you read this again Tim...I'll be calling
Chris

 

sounds like a nice intercooler. I would like to get one for mine at some point. my truck still gets warm and a member on here stated his truck ran about 200 deg cooler with an aftermarket intercooler and intake

 

So where can you see what one looks like and pricing?

 

http://www.htturbo.com/ic.htm

 

lmills posted some pictures of it before Christmas. Do a search.

 

The one on HTT webpage is not the same intercooler. The new one does not have or need tubing or pipes. It is polished aluminum with tig welded tanks. It looks almost identical to the spearco but fits much better. List is $1300 or so, DTR members get a better price though. PM me for details. Tim

 

That is not it!!! The one in that link was a Spearco they used to sell. They are cheaper than the $1500 thats listed in that link.

Dag gone Tim, you beat me to it. LOL

 

Pictures..... Here ya go...

https://www.dieseltruckresource.com/...d.php?t=183442

 

BUMP... Tim was going to get some measurements...

 

Is there room with the HTT to keep the blocking coolers...AC and other mounted below and out of the air path...I hate a nice looking cooler through the grill with two black blemishes on it. KS